Материнская плата Fujitsu Siemens D1107 Slot 1

System board in ATX format
• Intel Pentium II processor with 100 MHz or 66 MHz Front Side Bus for slot 1 processor socket
or
• Intel Pentium III processor with 100 MHz Front Side Bus for slot 1 processor socket
or
• Intel Celeron processor with 66 MHz Front Side Bus for slot 1 processor socket
Intel Pentium II / III and Celeron processors support MMX technology. Size and frequency of first-
level cache and second-level cache are depending on the processor used.
• Intel chipset 440BX / PIIX4E
• Intel 82559 LAN controller (10/100 Mbit/s) with RJ45 interface
WOL with Magic Packet
ä
is supported, as is booting from LAN with Bootix LAN BootP or Intel
LSA.
• Fujitsu Siemens system monitoring and temperature management
• 3 DIMM slots for 16 to 768 Mbyte main memory (SDRAM memory modules)
• Flash BIOS
• Energy saving functions
− ACPI S3 / Save-to-RAM (requires an operating system that supports ACPI).
− ACPI S4 / Save-to-Disk (requires an operating system that supports ACPI).
− APM
• Security functions:
− Chipcard reader interface
− Detection of unauthorized opening of the housing
− Simple error detection and correction in the main memory with an ECC
− System, Setup and Keyboard password
− parallel and serial ports can be deactivated
− Write protection for floppy disk drive
− Virus warning function for the boot hard disk
− Virus protection function for the flash BIOS and the EEPROMs on the memory modules
• 1 AGP slot, 4 PCI slots
AGP and PCI slots support 3.3 V main and auxiliary voltages.
• 1 ISA/PCI slot (shared) and 1 ISA slot or 2 ISA slots

• IDE hard disk controller connected to PCI bus for up to four IDE drives
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)
The IDE hard disk controller are ultra DMA33 mode capable and support PIO modes 0-4.
• Floppy disk drive controller (possible formats: 720 Kbyte, 1.44 Mbyte)
• The system board supports booting from a 120 Mbyte IDE floppy disk drive.
• 1 external parallel interface (ECP- and EPP-compatible)
• 1 external serial port (16C550 compatible with FIFO)
• 1 internal chipcard reader interface As an alternative this interface can also be used as a
second serial port (16C550 compatible with FIFO).
• 1 internal WOL interface
• 2 external PS/2 interfaces for keyboard and mouse
• 2 external USB ports (USB = Universal Serial Bus)
• 1 connector for internal infrared connection